Case Clamps CABTEQ T-250
Case Clamps CABTEQ T-250
Flexible pressing technology in a continuous process with automatic clamping unit
The CABTEQ T-250 automatically presses every carcase gently and to the highest quality. No matter whether sensitive surfaces, thin-walled materials or mitred furniture. The result is absolutely right-angled, rigid and cleanly pressed cabinets. The CABTEQ T-250 is also equipped with a clamping unit. This inserts the clamps perpendicular to the rear wall or at an angle between the rear wall and the side/bottom of the cabinet.
Highlights
The CABTEQ T-250 features an extended base frame. An x-axis is attached to this, which acts as a guide for the "clamp unit" assembly assistance. Other units can be used, for example for fastening the rear panel with "screwdrivers".
The throughfeed press is also equipped with a clamp unit. This inserts the clamps perpendicular to the back panel or at an angle between the back panel and the side/bottom of the enclosure and is the most commonly installed option for fastening the back panels. State-of-the-art 4-axis servomotor technology is used here.
Images
-
![]()
Reloading magazine with 10,000 staples -
![]()
The vacuum suction unit in the vertical pressure beam ensures that even long pages are kept in balance and thus a perfect press result is achieved.
Features
-
Less manpower required thanks to automated back panel fastening of the stapling unit.
-
Reproducible quality thanks to automated back panel fastening of the clamping unit.
-
Precisely adjustable pressing force allows pressing of carcasses with sensitive surfaces, thin-walled or small carcasses.
-
The main dimensions of length and height are scanned by sensors when the carcase is fed in and enable automatic positioning of the top pressure and the side pressure elements.
-
Electrical instead of pneumatic weight compensation of the upper pressure enables energy savings of up to 50 percent.
-
Pressing is centered on the zero line on the operator side. This means that the body is completely accessible to the operator.
-
Time efficiency thanks to automatic reloading of the clamps in the magazine, which can hold up to 10,000 clamps, while the furniture is being processed.
Technical Data
| Carcass dimensions |
|
| Carcass length [mm] | 250 - 2,500 |
| Carcass depth [mm] | 120 - 800 |
| Carcass height [mm] | 220 - 1,320 |
| Pressure |
|
| vertikal [kN] | max. 30 |
| horizontal [kN] | max. 15 |
| Feed speed Transports [m/min] | 12 - 40 |
| Working height [mm] | 500 |
| Weight [t] | 6.0 |
| Operating pressure [bar] | 6 |
| Transport interface | yes |
| Control | powerTouch |
(Previous product name: Electric throughfeed case clamp MDE 160)
Software
-
![]()
materialManager
All material data and stocks managed clearly in just one digital application.
-
![]()
ServiceBoard
Einfacher Maschinenservice
Schnelle Erstellung von Servicetickets
Überblick über alle Servicefälle
Here's how your colleagues produce
You might also like
Brochures
