Panel dividing saws SAWTEQ S-410 lifiting table
Panel dividing saws SAWTEQ S-410 lifiting table
In the SAWTEQ S-410, HOMAG offers a horizontal panel saw with automatic feed system that really speeds up the cutting process.
The SAWTEQ S-410 is a high-performance saw for processing larger volumes of panels in finish cut quality. The saw works reliably and precisely at high speed and delivers high throughput. This is achieved by, among other things, the lifting table for automatic feeding.
Highlights
Convenient operation and performance are ensured by the new control panel with an additional position on the pressure beam, intelliGuide (optional) operator assistance system and the quickTip assistant for optimal machine settings
With the new toleranceCheck tolerance measurement, you can produce continuously with a high level of quality (optional)
With optimized and even better coordinated processes in the cutting cycle, we achieve a performance increase of up to 20% - with improved energy efficiency compared to the previous version
Images
-
![]()
dustEx feeds chips and dust directly to the suction device after cutting. For a clean machine table at all times. -
![]()
The intuitive Operator Assistance System LED visually guides the operator through the processing steps by means of an LED light strip (option). -
![]()
Fully automatic angle cuts thanks to automatic calculation and adjustment of the angle – fast, efficient and with maximum care of material (option). -
![]()
combiTec saves material, time, money and manual work steps: due to automatic recuts during the regular cutting process (option). -
![]()
Cut-out option for simple creation of cut-outs, much easier handling than on a slidingtable saw (option). -
![]()
The postforming unit ensures a chip-free cut for softforming and postforming panels (option). -
![]()
The Power Concept Premium boosts output by up to 40 %, significantly shortens work cycles and reduces unit costs (option). -
![]()
Turning device for headcuts: significantly increases performance with suiTable cutting patterns and reduces the amount of handling required (option).
Features
-
Maintenance-free lifting table for automatic feeding from the rear
-
Central side pressure device: integrated directly in the saw carriage for short cycle times
-
Control software CADmatic 5
– Intuitively understandable
– Full HD widescreen multi-touch monitor
– Harmonized user interface powerTouch
– The new 3D assistance graphic supports the operator and is intuitive to operate
– Ready for connection to tapio
– Graphically supported diagnostics -
Ergonomic table height of 920 mm
Technical Data
| Saw blade projection [mm] | 110 (125 as option) |
| Cutting length [mm] | 3,200 / 3,800 / 4,300 / 5,600 |
| Program fence speed [m/min] | up to 90 |
| Saw carriage speed [m/min] | up to 150 (up to 170 as option) |
| Main saw motor [kW] | 50 Hz: 18 (24 as option) 60 Hz: 21 (21 as option) |
| Monitor | 24" full-HD multi-touch display |
| Operating software | CADmatic 5 |
(Previous product name: Panel dividing saw SAWTEQ B-400 | HPL 400)
Software
-
![]()
CADmatic 5
Simple, intuitive and ergonomic machine operation thanks to the 3D assistance graphic
quickTip—the assistance function for optimal machine settings—proactively makes setting recommendations
Reproduce parts easily, reliably and using a transparent process with the reproduction of parts option in CADmatic
-
![]()
intelliDivide Cutting
Optimization software for cutting processes on saws
Optimization of cutting plans with just a few clicks
Simultaneous calculation of multiple solutions
-
![]()
materialManager Advanced
Proposes optimal parameters automatically on your saw, corresponding to your materials, tools and quality requirements.
Videos
Please confirm that when you use YouTube, data such as your IP address, browser identifier and similar may be transmitted to Google.
» Privacy Policy
toleranceCheck: Continuously produce parts with the correct dimensions and angles
We will show you how to continuously ensure the required dimensional and angular accuracy of parts — even with stress-prone material.
-
![]()
Please confirm that when you use YouTube, data such as your IP address, browser identifier and similar may be transmitted to Google.
» Privacy PolicyquickTip — assistance function integrated in the HOMAG saw control system
Enables the highest quality, ease of use and performance.
-
![]()
Please confirm that when you use YouTube, data such as your IP address, browser identifier and similar may be transmitted to Google.
» Privacy PolicyKeynote SAWTEQ S-300 and S-310 as well as S-400 and S-410
Introduction of the new generation of saws.
-
![]()
Please confirm that when you use YouTube, data such as your IP address, browser identifier and similar may be transmitted to Google.
» Privacy PolicyMaterial in motion – storage, digital assistance and other features
We have the total solution from feeding to stacking
Brochures
Product Comparison
Lifting table saws for cutting
|
|
|
| |
|---|---|---|---|---|
| SAWTEQ S-210 lifiting table | SAWTEQ S-310 | SAWTEQ S-410 lifiting table | SAWTEQ S-510 with lifting table | |
| Cutting length [mm] | 3,200 | 3,800 / 4,300 | 3,200 | 3,800 | 4,300 | 5,600 | 3,200 | 3,800 | 4,300 | 5,600 | 3,200 | 3,800 | 4,300 | 5,600 | 6,500 |
| Saw blade projection [mm] | 65 (optional 80 or 95) | 80 (optional 95) | 110 (optional 125) | 150 (optional 170) |
| Program fence speed [m/min] | up to 80 | up to 90 | up to 90 | up to 90 |
| Saw carriage speed [m/min] | up to 80 (optional up to 120) | up to150 (optional 170) | 150 (optional up to170) | up to 130 (optional 150) |
| Left handed machine possible | - | |||
| Details | Details | Details | Details |
