Search results

intelliDivide — an optimization software made to impress!

Upload the parts list. Click. Select the cutting pattern. intelliDivide works quite simply: conveniently upload the parts list to intelliDivide and start the optimization with just one click. Cutting patterns [...] different solutions simultaneously and presents the alternatives clearly. Depending on the range of parts, mix of materials and the order size, up to nine different results are possible: less offcuts, minimal [...] associated optimization details are clearly highlighted in the overview. Individual areas, such as the parts, material or key figure views, are immediately visible thanks to the structured arrangement. The buttons

Industry 4.0: 4,000 furniture components leave Nowy Styl factory

edges, and watches wooden parts glide along conveyor belts, disappear into processing stations and finally leave the hall as a table, shelf or cabinet. “Following the flow of parts from up here is fascinating [...] oversee the operation. Up to 4,000 furniture components leave the factory every shift. Usually every part looks different, which is known as batch size 1 production in the industry. The time when standard [...] op­erates with a trimmer. This allows steps, corners and even zigzag patterns to be cut. Leftover panel parts are automatically gathered after cutting and brought back to the storage area. As soon as they are

Direct access to each workpiece, and that fully automated

the buffer - since the robot is able at any time to provide the precisely needed part due to the single access to each part. Here, the line demonstrates all its strength in batch size 1 production. Robots [...] robot sorting cell from HOMAG Automation - precisely the right solution for Starke. At Starke, the parts are directly transferred from the drilling machine into the sorting cell. The robot sorts the workpieces [...] workpieces flexibly into the different compartments, and thus enables a variable access to parts for the whole production. The keyword is "direct access to each workpiece, and that fully automated". This

Battistella Company: New edge system with woodFlex cell control.

company to implement woodFlex. "We primarily produce custom parts in batch size 1, but are very flexible in terms of small volumes of semi-finished parts for storage. This means that we generally produce weekly [...] number of processing, completed or rejected pieces, and which commission/order each part belongs to. The individual parts of each piece of furniture are held as a data record; during prototyping, checks are [...] through optimum calculation of minimum part spacing, quicker fault resolution and continual backup of the system state, so errors can be corrected much faster. Real-time part flow visualization and continuous

What’s new in woodWOP 8.1: Important milestones and new innovations for CNC programming

nest individual parts directly in the woodWOP interface. With the new macro "Single Part", single parts are moved by touch or mouse. Minimum distances to the edge and to neighboring parts are monitored for [...] clockwise or counterclockwise. You can also create holding webs for all parts, for small parts only or for a manual selection of parts. The CNC-compliant traversing of the holding webs, including grinding [...] account during nesting, a contour can be programmed as a "nesting safety distance" in the woodWOP single part program. What is new is that not only a single contour can be used, but several contours can be defined

Open heart surgery

system should be able to cut up to 4,000 parts per day, complete with formatting, edging and drilling or trimming. At full capacity, this equates to up to four parts per minute. A sizable figure. Not for [...] finalized way in advance and is rehearsed until everything runs smoothly. The setup is achieved in part through the help of a 3D simulation model that creates a virtual map of the production line. This [...] Since then all machines have been electronically controlled and know how to process each individual part. Quite early on, Artopex purchased a processing center for this purpose, as well as an edge banding

Linear portal STORETEQ H-300

H-300 the unprocessed part feed of your carpentry machine is fully automatic. With the help of the vacuum grippers, the portal picks up the beams from a stack of unprocessed parts and places them on the

Multi rip saws SAWTEQ C-700: Flexible crosswise division for the upper performance range

producing furniture and flooring parts in high batch quantities This cross saw is ideal for dividing workpieces in the form of strips or panels on production lines for furniture parts or flooring elements. The

Furniture Production

Batch-size-1 plant up to 1,200 parts per shift Batch-size-1 plant up to 1,600 parts per shift Batch-size-1 plant up to 4,500 parts per shift Series production for up to 3,000 parts per shift Series production [...] categorize them in performance classes: Line for 3,000 parts/shift Longitudinal and transverse line for 8,000 parts/shift Series production of up to 25,000 parts/shift Furniture production plan simulation for [...] ratio for your customers. Parts per shift is a figure that you will know only too well, as it defines the level of efficiency achieved. Mass production and identical parts per shift increase your return

Shaping the future together

remanufacturing order is immediately created from a defective part if it is identified as a defective part and especially if it is an order-related part. This means that the errors are already detected in upstream [...] Until a few years ago, Burger only produced 1000 parts per day on an order-related basis. In the meantime Burger now produces 8,000 fronts and carcass parts to order in flexible and highly automated production [...] value as possible to defective parts and thus avoid waste. At Burger, this Lean concept was consistently implemented throughout the entire logistics chain to ensure that all parts arrive at the assembly line