Search results

CNC-Technology: Almost infinite possibilities

strip shows at a glance which suction units have to be set in which orientation. DRILLTEQ D-510: Drilling, doweling, trimming without limits The DRILLTEQ D-510 is the perfect supplement for CNC surface [...] machine, which takes up only 4 m² of space, leaves nothing to be desired: from vertical and horizontal drilling, including through-holes, through vertical and horizontal trimming for connectors, such as the Lamello

Derg Joinery Venture BMG 311 - HOMAG

factor for us. The BMG’s tool changer has 27 tool places with a 13 position drill block for both vertical and horizontal drilling. This means we are able to save time between jobs, as we don’t need to manually

Open heart surgery

processing center for this purpose, as well as an edge banding machine that was interlinked with the drilling technology . “We were always keen to lead the way on technology,” says Bergeron. By 2014, the systems [...] the system should be able to cut up to 4,000 parts per day, complete with formatting, edging and drilling or trimming. At full capacity, this equates to up to four parts per minute. A sizable figure. Not [...] complex jobs and will be positioned alongside the production line. Networked right to the customer The drilling technology will be added from fall 2018, followed in spring 2019 by the sorting buffer. The sorting

Networked Workshop (Part 2): Ready for the Future in Three Steps

happened to you? You produce a workpiece on a CNC machine, but the program contains an error and the drilling pattern is wrong. Or the program does not exist at all so you have to spend a lot of time and effort [...] manner, meaning that all requirements are fulfilled for creating a parts list and a CNC program (drilling, contour trimming, etc.). The industry system delivers all data for each part to ensure consistent [...] consistent processing along the entire process chain (cutting, formatting, edging, sanding, drilling, fixture positioning, installation). This is achieved by using an industry system or a CAD|CAM system (e.g

Thomas Johnstone invests in HOMAG

bullet and replace that too. “Later in the evaluation process, HOMAG suggested we consider a BHX 050 drilling machine as it could make a significant impact to automating our production process. So we added [...] package we agreed with HOMAG included an HPP 300 beam saw, and KDF 650 edge bander and the BHX 050 CNC drilling machine. We also decided to go down the barcode route and purchased the woodCAD|CAM software once [...] the edge bander has eliminated the need for manual finishing and the BHX has removed the need to drill holes on a bench or by hand,” concludes Michael Hillman. If you’d like a demonstration or more information

Goldbach Kirchner: One of the most up-to-date Industry 4.0 plants

insertion of components, change of component orientation for further transport), a fully automatic drilling and dowel driving machine and a stand-alone case clamp. The new plant allows Goldbach Kirchner to

The perfect pair – HOMAG’s CENTATEQ E-310 and powerEdge Pro Duo

level of performance, enhanced by a wide choice of configuration options for processing spindles, drilling gears and tool-changers. With an array of machining features as standard, the CENTATEQ E-310’s basic [...] Operators also have full access to the front side of the machine so it is easy for them to carry out drill and edge changes, refilling adhesive reservoirs, and general servicing work, Thanks to new components

Industrial manufacturing for personal bathroom furniture

ty, the components are also fed to machining centers, which perform component-specific milling, drilling and sawing work. A part of the workpieces also goes into the coating, where they are ground, painted [...] furniture is carried out in several steps according to the order. For example, individual holes are drilled, furniture fittings are attached or drawers are mounted at separate production islands. In this way

Carpenter produces 3D parts for his 5 axis CNC without using a CA

needed. Benjamin Löw is pleased that, as a test candidate, he can use the beta version 7.1, as a drilling and sawing macro has been added to this. It can be applied to selected surfaces, as described above [...] this case, the programming system automatically detects what needs to be sawn and what is to be drilled based on the workpiece geometry. Benjamin Löw selects “Automatic” and lets it generate the CNC program

HOMAG UK provides Trade CNC the helping hand for increased production

tips, the transformation in the quality of edgebanding was priceless.” “Prior to the BHX, we had to drill certain items by hand, one contract alone required 16,000 holes to be produced all of which were done [...] accuracy of the results were second to none. “The time saved by automating both the edgebanding and drilling processes gave the business the expansion and business openings we could have only of dreamed of