Search results

HOMAG SAWTEQ B-130 im Einsatz bei Kortland Möbelwerkstätten

was added, followed in 2016 by a HOMAG edge banding machine, and two years after that by the small BHX 055 CNC processing center. The latest acquisition is the SAWTEQ B-130, which was installed in December [...] This can only be done with modern technology, and this is where HOMAG comes into play." Routine: a new HOMAG every two years The first HOMAG machine was purchased in 1999 by the current owner's uncle: A [...] the same work in a shorter time on the SAWTEQ B-130 !" This increase in efficiency, a comparatively low price and the small amount of space required for the HOMAG entry-level saw were ultimately decisive

SAWTEQ B-130 (now S-100) noticeably increases performance

and in terms of production technology. The latest investment is the SAWTEQ B-130 (now S-100) horizontal panel dividing saw from HOMAG. The Schreinerei Schwieck joinery is a real family business. In addition [...] been their biggest growth area since the commissioning of the new panel dividing saw from HOMAG. "The SAWTEQ B-130 (now S-100) acts like a turbo." Panel cutting with optimization potential The saw was put [...] " That's why the project was not implemented in the end. Reduces material consumption The new SAWTEQ B-130 requires little more space than a well-equipped sliding table saw. However, the difference is

SAWTEQ B-130 increases CPA Bespoke Joinery’s capacity

MagiCut software so it didn’t take them long to become proficient on the B-130.” Exceeded expectations “All in all, the SAWTEQ B-130 has exceeded our already high expectations. It has freed up labour, si [...] didn’t try to up-sell us with unnecessary options or higher spec models. He recommended the HOMAG SAWTEQ B-130 with the module45 which means we no longer need a sliding table saw for bevel cuts. “The module [...] last year, when the time came to invest in a beam saw, we looked no further than HOMAG. “We have known Jon Lawman, HOMAG’s area manager, for over ten years and during that time he has not only built up an

Retail Design Consultants partners with HOMAG

we settled on the HOMAG SAWTEQ B-130 and the EDGETEQ S-240 models. We had seen these machines in action at the HOMAG showroom in Castle Donington and also at exhibitions. The HOMAG brand and reputation [...] bander and SAWTEQ B-130 beam saw “With the majority of our products being panel-based, the edge bander is a critical piece of kit for us. The quality of finish and performance of this HOMAG edge bander [...] machine handles a wide variety of edge materials, further improving our production flexibility. “HOMAG’s SAWTEQ B-130 beam saw has made a significant difference to our production; it is fast, reliable, and has

JDH Joinery ramps-up production with new HOMAG equipment

recently invested in a HOMAG SAWTEQ B-130 panel saw. According to company director, Joseph Hannigan, the company’s joiners can now manufacture twice as many panels with the HOMAG panel saw than they previously [...] received from HOMAG saying: “I was impressed with the expert advice provided by the HOMAG sales representative, and with the timely HOMAG installation and comprehensive operator training. HOMAG is therefore [...] that had long-term experience of using the HOMAG SAWTEQ B-130 panel saw. His own experience of the efficient operation and reliability of other types of HOMAG machinery used in his workshop also played

Panel Dividing: new machines and software solutions provide even greater flexibility and efficiency

utilization factor NEW: SAWTEQ B-300 flexTec/B-400 flexTec with improved performance — now with up to 1000 parts per shift. With the SAWTEQ B-300 flexTec and SAWTEQ B-400 flexTec series, HOMAG is focusing on increased [...] clamp is also available for the SAWTEQ B-200 series. Power Concept Classic Simultaneous dividing of two strips with different cross cut divisions on the SAWTEQ B-130 and B-200 Drive unit independent of program [...] NEW: The SAWTEQ B-130 entry-level saw provides even more flexibility and material throughput. The smallest SAWTEQ B-130 panel dividing saw will be equipped with a further, optional clamp for the first

CNC Creations invests in a beam saw and edge bander from HOMAG

purchase of the EDGETEQ in February 2022, we returned to HOMAG to see the saws in action. That led us to place an order in June for the HOMAG SAWTEQ B-130 beam saw. The speed, accuracy and cut quality of this [...] and McLaren. To help cope with a surge in demand, it recently invested in two new HOMAG woodworking machines –a SAWTEQ B-130 beam saw and an EDGETEQ S-300 edge bander. “The pandemic was a challenging time [...] edge bander. “For the SAWTEQ we added a label printer which has helped improve throughput and traceability of cut panels. My only regret is that we didn’t invest in the larger SAWTEQ B-300 machine. Both the

Kitchen designer and manufacturer Archispek Limited selects HOMAG

employees. That year, a HOMAG SAWTEQ B-130 panel dividing saw was also installed in Archispek’s woodworking shop for cutting single wood panels and small batches. The SAWTEQ B-130 panel saw costs hardly [...] has invested approximately £400,000 in HOMAG machinery over eight years. An expanding workshop of HOMAG equipment The company's first installation in 2014 was a HOMAG BHX 055 Vertical CNC Processing Centre [...] efficient cutting process. This is achieved by proven HOMAG technologies and an increase in automation and processing capabilities. More recently, in 2022, a HOMAG EDGETEQ S-300 edge bander was installed in the

Ocean Kitchens selects HOMAG for its new manufacturing facility

routed and drilled The package HOMAG put together for Carkus Solutions included the SAWTEQ B-130 panel saw, the EDGETEQ S-240 edge bander and the BHX 055 CNC. The SAWTEQ B-130 panel saw costs hardly any more [...] cutting process. This is achieved by proven HOMAG technologies and a clearly perceptible increase in automation and processing capabilities. In short, the SAWTEQ B-130 panel-sizing saw makes it easier to enter [...] like a demonstration or more information about HOMAG edge banders, the DRILLTEQ range of CNC drilling machines or SAWTEQ panel saws, please contact HOMAG UK on 01332 856424.

Panel cutting from woodworking shops to industrial applications

series: SAWTEQ B-300/B-400, SAWTEQ B-500, SAWTEQ B-300 flexTec and SAWTEQ B-320 flexTec Measuring System Cutting Quality (MSQ) makes its debut on the SAWTEQ B-300 flexTec at HOMAG Treff The SAWTEQ B-300 flexTec [...] smallest HOMAG panel cutting saws—like the SAWTEQ B-130 and SAWTEQ B-200 —an excellent choice for woodworkers. The innovative Power Concept Classic is now available without a lifting table for the SAWTEQ B-130 [...] machine. Performance increase for fully automatic batch size 1 cutting: SAWTEQ B‑320 flexTec With the SAWTEQ B-320 flexTec , HOMAG is setting new standards for batch size 1 production and allows highly