Search results

HOMAG edge plants opens up completely new possibilities for Polish door manufacturer Erkado

applied to the edge material directly before the adhesion via application rollers. A processing station, which has a decisive effect on the efficiency of this plant, is located directly after this. In this way [...] surface-coated door leaf parts are transported to the plant stack-by-stack by roller conveyors. The direct supply, carried out by an articulated robot, takes place via two feeding stations, which are flanked [...] trimming unit is moved along the longitudinal side of the door leaf, at right angles to its transport direction. The clean edge produced in this way serves as a defined contact surface for the feed cams of the

Pyramid Lane puts its trust in HOMAG machines

with the new machines via a simple software update, allowing the storage system to be controlled directly from the saw. Pyramid Lane was the first Malaysian furniture manufacturer to venture into automated [...] products flexibly and efficiently in batch size 1 or series production, depending on the needs and requirements of its customers. Pyramid Lane saw the most important benefit of using the right automation solution

TRANSBOT — the dawn of a new production philosophy

from our direct machine operation thanks to the driverless transport system." Questions such as "How can the various cycle outputs of processing centers be matched?" and "How can the required flexibility [...] platform deinSchrank.de and are then adapted to the production requirements in the work preparation. Production orders containing all the required component data are created and then distributed to the production [...] their ideas into a reality goes to a carpenter, and has furniture custom-made according to their requirements. This is exactly where the solution from deinSchrank.de comes in. deinSchrank.de is the German

HOMAG Treff: A calendar highlight for 30 years

of levels of information, fewer clicks are required to produce the desired results. The real 3D workpiece simulation, the display of the dimensions directly on the 3D workpiece and the automatic check [...] be presented as a variant of the platform. This series caters to all demands as well as future requirements — from entry-level woodworking shops through to industrial orientation. Improved handling and [...] The link for edge processing With the Edge data plug-in software module, woodCommander 5 creates a direct connection between the machine control unit and the edgeband assistant ("Edgeband Management Set")

When a progressive furniture production concept becomes reality

production with few manual activities required reliable information for each individual part. Every machine - from the saw to the edge bander and the automatic drill – requires unique data, which had to be r [...] plant, a maximum of five to six employees are required. The test process for each individual machine and link could be completed by summer of 2015, with direct support from SCHULER. The customer’s wishes [...] company also found the opportunity to expand towards African countries such as Angola. Overall, the required capacity of J&J Teixeira is on the rise and has gained more volume in recent years. In 2014, the

CNC-Technology: Almost infinite possibilities

test pieces are generally not required. The speed, the temperature and the contact pressure are defined at every point on the contour. Exact tracing and a feed roller with direct travel measurement guarantee [...] the other side, run a program with four consoles that is entirely program-controlled and does not require any manual intervention. LED strips are also available as an option. These round off the operation [...] point, the operator must still use the operating monitor to determine which clamping equipment is required and how it is to be set on the machine. This is no longer necessary thanks to these optional LED

How will prefabricated houses be produced in the future?

less flexible due to the serial production. Changing the wall construction on the WEINMANN line requires a lot less effort, says Schandl: "We took the trouble of optimizing all the process steps previously [...] transport perspective it's a different story — the limit for transport is 3.05 m. Anything beyond that requires special transport." Process networking is the key to productivity With the new line, all production [...] was that we could use the data from our Sema design planning to actuate the new WEINMANN systems directly. As we could not do this on our old systems, we had to install this granite interface - which optimizes

State-of-the-art automation

already been applied. For anything that requires no further processing, the magazine is followed by the direct RKR 180 destacking via robot. At this point, parts that require special bore holes can also be fed [...] of the newer buildings in Saxony-Anhalt (which had previously been used as a warehouse) met the required prerequisites, Kirchner decided to make the purchase. Shortly after buying the site in April 2015 [...] it was the performance of HOMAG, with a really innovative system concept that met all of our requirements for machines and software, that convinced us," says Schmidt, summing up the decision. The processing

Step by step to the right software

in order to define the customer's requirements more precisely on a technical and functional level: What must the new software be able to do to meet my requirements as a customer? What are optional fu [...] weaknesses of the existing software. Together they conduct a potential analysis and determine the requirements for the new software and the client's objectives regarding the development of his company. Where [...] "hard facts", the potential software supplier's knowledge and experience in project management are required, such as their solution competence and their references ("soft facts"). Last but not least, the

No need to move mountains at the foot of Mount Pilatus

development has consequences: "We never planned to get so big," Vogel says. Evolution marches on Growth requires a rethink — both technically and spatially. In 2012, Vogel bought a larger property in the village [...] to be reliably implemented," the company's CEO acknowledges. "I also expect this from my partners: Direct communication, short distances, no detours." No need to move mountains at the foot of Mount Pilatus [...] time and makes work on the machine more effective. Two synchronized digital servo drives in the X direction ensure processing quality; the tool change system features several slots. The CENTATEQ with its