Search results

Leading Door Manufacturer invests in 5-axis CNC's & edgebander

engineered fire doorsets more efficiently. He purchased two HOMAG CENTATEQ P-500 5-axis CNC machines, a CENTATEQ P-310 5-axis CNC processing centre and an EDGETEQS-500 edge bander. Reliability and ease of use along [...] previous machine had a limitation of only 60mm. “Our new CNC machining centres are 5-axis, while our former models were only 4-axis. Having 5-axis CNC machines means we can carry out more operations without [...] selected HOMAG as its preferred partner for woodworking equipment. The company invested in three new CNC machining centres and a new edge bander to replace and update some of its existing HOMAG equipment

BENZ Tooling Gengenbach

working with metal, wood and composites. CNC units from BENZ for wood and composite machining The exchangable units from BENZ Tooling are the perfect completion for your CNC machine. Are you facing a challenge [...] Machines CNC Machining Centers Drilling- and Fitting Insertion Edge Banders & Tenoners Edgebanders and Edge banding machines Double End Tenoners Edgeband material remaining length calculator Panel Dividing [...] Preparation Production Management Service Solutions Software for Timber Construction Software Downloads CNC Software Downloads Cutting Software Downloads MMR Software Downloads Timber Construction Software Downloads

CENTATEQ P-510|610 + E-510 processing centers

Maximum performance and possibilities - a complete system. Your choice when it comes to CNC processing for demanding production requirements Stairs, furniture, windows, doors, interior fittings - with [...] our CENTATEQ P-510|610 + E-510 series, you are ideally equipped for all your tasks. Each of these CNC machines forms a complete system that is your basis for maximum performance and possibilities for meeting

Auckland-based TimberLab Solutions is Australasia’s largest, most experienced, internationally recognised provider of customised structural engineered timber products.

running along rails stretching half the length of their factory (approx. 30 m). The company’s 5 axis CNC Gantry, weighing 10 tonnes, means they are able to offer specialist detailing and extremely efficient [...] CEO of TimberLab Solutions, about the company’s historical development and the decision to move into CNC technology. Q: Timberlab Solutions has a long history. How did all start? McIntosh: We started in 1957 [...] solution for their building without changing the actual building. Q: Why did you decide to invest in CNC technology? McIntosh: Keeping in the forefront of engineered timber solutions meant that we needed

wupWorks 4: The machine control for carpentry

4, then automatically or manually optimizes the components and starts the automatically generated CNC program for processing. Alternative processing strategies can be selected if needed to ensure fast [...] optimization so that they are in the ideal position, but manual intervention is also possible at any time. CNC data is automatically generated in the background for each adjustment.

Izmir Çetinmak Ev Fuarı

Otomatik Kenar Bantlama EDGETEQ S-500 Tam Otomatik Kenar Bantlama CNC ve Delik Makineleri: CENTATEQ P-110 5-Eksen CNC İşlem Merkezi DRILLTEQ V-310 CNC Kontrollü Dikey Delik Makinesi FEEDBOT D-300 Robot Besleme

Maximum CNC processing at Manfred Lehmann Innenausbau.

the machine pool, the Lehmann workshop relies on HOMAG whenever possible. After all, according to CNC expert Ingo Giesler, operation of HOMAG machines has been ingrained over the years, and the quality [...] machines is beyond any doubt. That is why the company wanted a HOMAG machine when purchasing a stationary CNC processing center intended to relieve the burden on the horizontal CENTATEQ. The problem at the time [...] processing spectrum over the 12 square meters available. Perfect timing Foreman Christoph Lehmann and CNC specialist Ingo Giesler had already decided on another machine. There was no space available for a

HOMAG UK provides Trade CNC the helping hand for increased production

1110F and WEEKE BHX 050. Right from the beginning they opened the doors to great opportunities. Trade CNC began winning contracts that we never would have even considered nor been able to manage before. From [...] year, we once again took to the drawing board to see how we could enhance the technologies at Trade CNC further – having considered the cost implications to upgrade and improve our existing flatbed nesting [...] achieve. Even though our original machine is still in production, we decided to invest in a brand new CNC processing centre that had the capacity to fulfil our wildest expectations.” “Our decision to stick

CNC proves to be a game-changer for timber window manufacturer

high end timber windows and doors specialist French & Westcott has invested in a HOMAG CENTATEQ P-310 CNC processing centre. The husband and wife team, Ryan and Sophie Woodward, launched the business in 2013 [...] possibilities “We began our search for the right solution by visiting the UK facility of a European CNC machine manufacturer. Seeing this machine in action really opened our eyes as to what could be achieved [...] confidence to proceed with HOMAG. At the time, we were novices as far as knowing how to specify the CNC to best meet our needs. That meant we had to put our faith in HOMAG’s people to be honest and truthful

Sven Christiansen invests in new edgebanding and CNC solutions

cent happy.” The HOMAG CENTATEQ E-310 CNC “We took delivery of our new CNC machine just a month after the edge bander had been installed. This HOMAG CENTATEQ E-310 CNC was a replacement for an older model [...] approach. The majority of machinery in our facility is from HOMAG; we even have a 27 year old BP15 CNC machine which is still working on a daily basis. More impressive, perhaps, is the fact that we can [...] drivers here was to have a machine that was both more productive and accurate. “The need was for a CNC that would enable us to machine complex parts and also edge the shaped panels. The E-310 is the perfect