Search results

AJB Group launch into the realm of fire doors.

another CNC brand for 15 years, this time they wanted a full package from a single manufacturer: a beam saw, an edge bander, and a CNC machine. “Everyone spoke very highly of HOMAG and its machines,” says [...] three machines.” After consulting with HOMAG and visiting their Castle Donington showroom, AJB opted for the SAWTEQ S-300 panel dividing saw, the EDGETEQ S-500 edge bander, and the CENTATEQ P-110 CNC machine [...] Amarjit shares. “The big decision was switching CNC brands – we were used to a different setup. But we knew that for this to work, we needed all three machines under one brand… and anyway, the CENTATEQ P-110

Bohrsysteme Herzebrock

Machines CNC Machining Centers Drilling- and Fitting Insertion Edge Banders & Tenoners Edgebanders and Edge banding machines Double End Tenoners Edgeband material remaining length calculator Panel Dividing [...] heart of East-Westphalia. Our portfolio includes CNC processing centers, throughfeed drilling machines, drilling and dowel insertion machines as well as machines for drilling and fitting insertion. With more [...] High school graduates HOMAG Employee Stories Menu Search Back Machine Finder Step by step to the machine you are searching for... Open the Machine Finder Our Theme Worlds One click to our solutions for you:

Sven Christiansen invests in new edgebanding and CNC solutions

cent happy.” The HOMAG CENTATEQ E-310 CNC “We took delivery of our new CNC machine just a month after the edge bander had been installed. This HOMAG CENTATEQ E-310 CNC was a replacement for an older model [...] BP15 CNC machine which is still working on a daily basis. More impressive, perhaps, is the fact that we can still get spare parts for it from HOMAG!” Changes in demand drive need for new machines “The [...] Again, one of the main drivers here was to have a machine that was both more productive and accurate. “The need was for a CNC that would enable us to machine complex parts and also edge the shaped panels.

HOMAG: Intelligent networked machine concept at Ries Akustik

where Ries Akustik comes into play. With a newly installed machine combination from HOMAG—consisting of a panel dividing saw, storage system and CNC drilling center—the company is not only stronger than ever [...] years ago we invested in a five-axis CNC processing center from HOMAG," reports André Wild. This was followed a little later by a new HOMAG wide-belt sanding machine. The aim was to increase the proportion [...] those responsible immediately aimed for the big solution and planned to implement a completely new machine concept at the new location as well. "We are operating in a niche market with high price pressure

Claris Housewares & Stationery automates production with HOMAG

the machines was precise and organised. Both the saw and the drilling CNC were installed by HOMAG engineers on time and inside five days. “Our operators were given a day’s training on both machines. This [...] a suitable beam saw and CNC drilling centre. We narrowed our shortlist down to a couple of brands and carried out a more thorough investigation which included seeing the machines in operation at other companies [...] lifetime of the machines. “Taking our short and long-term requirements into account, we decided to place orders for a HOMAG SAWTEQ B-130 entry level beam saw and the highly rated DRILLTEQ V-200 CNC processing

Brands

Machines CNC Machining Centers Drilling- and Fitting Insertion Edge Banders & Tenoners Edgebanders and Edge banding machines Double End Tenoners Edgeband material remaining length calculator Panel Dividing [...] High school graduates HOMAG Employee Stories Menu Search Back Machine Finder Step by step to the machine you are searching for... Open the Machine Finder Our Theme Worlds One click to our solutions for you: [...] Elektroniker für Betriebstechnik (m/w/d) 2026 HOMAG GmbH All Jobs Machine Finder Step by step to the machine you are searching for... Open the Machine Finder Our Theme Worlds One click to our solutions for you:

CNC proves to be a game-changer for timber window manufacturer

began our search for the right solution by visiting the UK facility of a European CNC machine manufacturer. Seeing this machine in action really opened our eyes as to what could be achieved. At that point, [...] back to successfully unload the machine and locate it in the new small out-building (11 m x 10 m) we had constructed especially for the CNC. “They delivered the machine on the Monday morning and once the [...] Colchester, both of which were running HOMAG CNCs and other HOMAG machines too. “Committing to investment in a technically advanced machine such as the CENTATEQ P-310 was a massive decision for us. It could

Customer back to full capacity thanks to HOMAG CENTATEQ P-110

investment of a new CNC machine – one which could both simplify and enhance production with cutting-edge capabilities. The machine in question is HOMAG’s CENTATEQ P-110 5-axis CNC Machining Center. A setback [...] biding our time until we could get our hands on another HOMAG CNC.” Why HOMAG? Having previously experienced success with a HOMAG CNC machine, Northern Fire Solutions had no hesitation in turning to HOMAG [...] watch our guys operate the machine, to ensure they were comfortable with it. It was a seamless transition.” Immediate benefits Years after the failure of their old CNC machine, Northern Fire Solutions Ltd

Software Downloads

Machines CNC Machining Centers Drilling- and Fitting Insertion Edge Banders & Tenoners Edgebanders and Edge banding machines Double End Tenoners Edgeband material remaining length calculator Panel Dividing [...] High school graduates HOMAG Employee Stories Menu Search Back Machine Finder Step by step to the machine you are searching for... Open the Machine Finder Our Theme Worlds One click to our solutions for you: [...] Elektroniker für Betriebstechnik (m/w/d) 2026 HOMAG GmbH All Jobs Machine Finder Step by step to the machine you are searching for... Open the Machine Finder Our Theme Worlds One click to our solutions for you:

woodWOP 8.1: Used every day. Inspired every day.

kitchens and individual furnishings for private customers and are also active in the contract sector. CNC machines have also been used for this since 1996, today primarily the DRILLTEQ V-500 with split head and [...] 5-axis spindle. According to owner Raimund Fuchs, the machines complement each other perfectly. Initially, all workpieces were programmed on the machine, but since 2017 a CAD system has been used that au [...] The carpenters also program individual parts and small orders directly in woodWOP at the machine. Overall, the CNC programming software woodWOP is characterized by its clear operation, simple programming