Search results

Alexander Cleghorn invests in bespoke edge banding solution

panels and delivers them into the machine. “This was backed up by a separate visit to see a similar edge banding machine to evaluate the quality of the finished edging on the panels. These visits enabled [...] (normally 12kgs/hr), the servo-controlled edge feeding system which drives the edge tape into the machine to match the track speed, and the 12-coil magazines for edge tapes – enables the cell to run at a rapid [...] invested in a £1 million plus machine deal with HOMAG UK. The investment, for a bespoke staggered tandem line edge bander featuring two HOMAG EDGETEQ S-810 powerLine machines, has helped the company drive

Future-oriented solutions for carpenters and joiners in all performance classes of edge banding machines

cell The combination with the return and the new automatic two-part edge magazine increases the productivity of the edge banding machine. The LOOPTEQ O-300 workpiece return is ideal for a wide range of parts [...] At LIGNA, HOMAG will be presenting a wide range of edge banding machines, from the entry-level models to industrial production. Digitalization plays a central role here. The following will be demonstrated [...] woodCommander 5 software generation and the Edge Data plug-in EDGETEQ S-500 narrow parts machine for a minimum part width of 40 mm EDGETEQ S-240 — Maximum edge quality in the entry-level area with a feed

-

also for its pioneering edge banding technology. After contacting HOMAG UK the area manager, Jon Lawman, invited us to visit the Castle Donington showroom to look at its edge banding solutions. “We did visit [...] the far end after they had been edged. This meant we needed an additional operator to manually turn the doors so that they could begin the edging process on the opposite edge. With 80 per cent of our man [...] consuming and was slowing down production.” Looking for the edge “We started our search for a replacement machine by looking at a couple of the popular edge bander manufacturers. However it was proving difficult

Digital production, automation and perfect edge quality with the EDGETEQ S-500 series

different edges are automatically fed in. The servo edge feed reduces edge waste. The edge thickness compensation , for compensating for the tolerances of the edge material, is integrated into the edge data [...] make their edge information available via tapio. Data such as edge thickness, edge height and available length of the selected edge roll are transferred directly to the machine using the Edge Data Plug-in [...] depending on the machine equipment. With "Basic," the edge length is mainly processed. With "Performance," both the edge length and the actual edge thickness are processed. The tolerances of the edge thickness

Edge banding machines EDGETEQ S-500 Optimat and profiLine

One machine. Unlimited possibilities The single-sided EDGETEQ S-500 machines offer precise gluing and perfect post-processing of edges. PUR and airTec can be used if required. The feed rate can be set [...] requirements. Automation and further functionality can be added on an individual basis for these edge banding machines.

Holz Design van Kessel – A wonderful profession

to a new edge banding machine When the time came to replace the existing edge banding machine, Jan van Kessel's thoughts turned immediately to HOMAG as he had good experience with HOMAG machines from the [...] self-employed. After careful consideration, in 2016 he decided to buy an edge banding machine from the EDGETEQ S-240 series. This machine is predestined for ambitious carpenters and is therefore perfect for [...] unit, the machine has a significantly higher processing quality that means that parts no longer need to be reworked. Jan van Kessel is happy as, after acquiring the new edge banding machine from HOMAG

The Complete Kitchen Company invests in HOMAG edge bander

interrupting production on the edge banding machine. Premium quality edge banding with a small footprint “There were a couple of reasons we decided to buy the HOMAG’s EDGETEQ S-380 edge bander,” continues Tony [...] is supplied by HOMAG.” Updating our edge banding capabilities “One of our edge banders was coming to the end of its life and while it was still working, edge banding technology has moved on so we felt it [...] it was the right time to invest in a new machine. It was important that the new edge bander would help increase our output capacity, whilst at the same time enable us to take advantage of the benefits

Joinery manufacturer invests in EDGETEQ S-380 egde bander

for error in edge banding is notoriously fine. This machine gets it right pretty much every time.” Reliability is another significant benefit highlighted by Josh. “The edge banding machine is absolutely [...] new edge banding machine.” Choosing HOMAG: Trust and reliability Michael Pepper Joinery’s journey with HOMAG began years ago with the acquisition of a 1998 HOMAG edge bander. “It was a great machine that [...] a new edge bander.” Another reason for sticking with HOMAG was the reliability of their service. As Josh explains, “Every door we make has to go through our edge banding machine. If the machine breaks

Edgebanding: Future-oriented solutions for carpenters/joiners in all performance classes

a one-way street — the edge banding machine also reports the remaining length of the edge roll back to the app. This means that the edge stock is always up to date for the machine operator as well as for [...] Leading edge suppliers, such as Rehau and Ostermann, already make their edge information available via tapio. Data such as edge thickness, edge height and available length of the selected edge roll are [...] flexibility when operating the machine. In addition, widgets, e.g. for programs or edge material, simplify the handling. NEW: Edge data management with woodCommander 5 With the Edge data plug-in software module

Family-run small business invests in HOMAG Edge bander

recommended the machines to be considered – machines which would lend themselves to current need as well as potential need for a growing business. “When you start off with an edge bander, or any machine, when you [...] doesn’t feel forced. These machines open doors, but it’s the people behind them who show you the way through. “Anyway, after 17 years of it, we were no strangers to edge banding and all the benefits it brings [...] minimum requirement for the new edge bander was that it needed to do everything the old one did. We also suspected there may have been one or two advancements in edge banding technology since the early 2000s