Search results

Shaping the future together

fronts with defects amounted to around 350 to 400 units per day. However, it is often possible to cut these defective parts "well" again in order to feed them back into the production process. The aim

The next step — but certainly not the last.

Machine operators don't just work on one HOMAG machine. Instead, they accompany the workpiece from cutting until it is completely machined and ready for further processing in the assembly area. As a result

Networked Workshop (Part 2): Ready for the Future in Three Steps

delivers all data for each part to ensure consistent processing along the entire process chain (cutting, formatting, edging, sanding, drilling, fixture positioning, installation). This is achieved by using

Digital future with perspective — productionManager from HOMAG

The released job arrives at the panel dividing saw first. There, the component is labeled during cutting. The machine automatically reports the production progress of the component back to productionManager

New production concept from HOMAG in use at Oberhaizinger

processing, which removes one processing station from the chain," says Raab. "By using the CENTATEQ for cutting and CNC processing, we can produced a finished part that only has to be edged and undergo final assembly

Pionier des industrialisierten Bauens in Brasilien

Tecverde’s factory has a specific area for raw material transformation, where wood and panels are cut, in addition to the pre-assembly of electrical, plumbing and window frames that make up the wall panels

Custom-made flexible workflow

barrier, but in future, this level will consist of an AGEPAN panel into which the WALLTEQ M-380 will cut the cable channels. The walls will then leave the hall completely sealed, including the preparation

HOMAG India goes the VOC way!

efficiency. “So far as IoT is concerned, it is a wholly proactive and predictive technology. It is about cutting wastage, increasing efficiency, reducing chances of down time (due to machine maintenance and breakdowns)

German machine technology as the key to success

with a WBZ 160 carpentry machine where the beams and studs required for the timber frame work are cut. The second machine in the processing chain is a WEM frame work station equipped with an automated

If you have a problem, you go to the Eibl joinery

plating that is so precise that it takes grooves to get glue in between at all. Or that his employees cut hidden cable ducts for integrated lighting concepts into wooden tables. Open eyes open up markets.