
パネルソーSAWTEQ B-500アンギュラー型
短時間で大量のアウトプット:シリーズ 5の全自動角度調整装置はその高い性能が特徴で、産業製造の分野で新しい基準を確立します。
SAWTEQ B-500は産業分野での連続運転向けに開発されました。角度調整装置であるこのマシンは、シリーズ 5の技術的なメリット、そのサイズ、パワー、装備の柔軟性によって、切断において好成績をあげます。このハイテク鋸は、複数シフト制の生産および産業生産ラインへの統合に適しています。
(パネルソー HKL 500)
利点
Fully automatic angle cuts thanks to automatic calculation and adjustment of the angle – fast, efficient and with maximum care of material (option).
dustEx air jets transport dust and chips towards the right-angled fence: improves extraction and prevents scratches.
Micro-feed units for thin panels work very precisely thanks to a non-contact measuring system and shorten the cycle times (option).
The panel labeling system saves time and guides the operator (option).
Pneumatically operated trim stops: for precise positioning and safe processing of sensitive materials (option).
The postforming unit ensures a chip-free cut for softforming and postforming panels (option).
The Power Concept Premium boosts output by up to 40 %, significantly shortens work cycles and reduces unit costs (option).
Cutting pattern optimization in the office – for precise project control, efficient cutting processes, cost control and faster pricing (option).
The stress-elimination cut releases the tension in the material, thus improving the dimensional accuracy (option).
Turning device for headcuts: significantly increases performance with suiTable cutting patterns and reduces the amount of handling required (option).
技術ハイライト
重厚で高いねじり剛性を持つ鋸台車は、送り速度の無段階調整が可能で、高いダイナミック性と精度を実現
SORB TECH 製の鋸ボディ – スチールビーム構造と比較した場合のメリット:
– 振動吸収性が 10 倍増加
– 騒音吸収力が 20% 増加
– 鋸刃の耐用年数が 30% 増加
– 製造時に 40% の省エネ主鋸の上昇はエア圧によって行われるため、位置決め速度が高く、メンテナンスも手軽
後方からの自動送りを行うメンテナンスフリーのリフトテーブル
制御ソフトウェア CADmatic 5
– 直観的に理解できる
– ワイドタイプの Full-HD マルチタッチディスプレイ
– 統一された powerTouch ユーザーインターフェース
– 新世代3Dアシスタンスグラフィックが作業者が直感的に操作できるようにサポートします
– tapio に接続する準備ができました
– 視覚的なエラー診断
技術データ
鋸刃突出量 | 150 [mm] (オプション170 [mm]) |
切断長さ、切断幅 リフトテーブル幅 | リップソー: 3,200/4,300/5,600 [mm] |
プログラムフェンス速度 | リップソー: 90 m/分、クロスカットソー: 140 m/分 |
鋸台車速度 | 最高130 m/分(オプション150 m/分) |
主鋸モーター | 18 [kW] (オプション: 50 [Hz]の場合は36 [kW]、60 Hzの場合は42 [kW]) |
操作ソフトウェア | CADmatic 5 |
カタログ & ダウンロード

さらに質問はありますか?
Stiles Machinery Inc. Sales
616-698-7500 +1-616-698-7500 info@stilesmachinery.com www.stilesmachinery.comStiles Machinery Inc. Service
616-698-6615 techsupp@stilesmachinery.com お問い合わせフォーム