Venture processing centers | BMG 310 series

Operation made easy: Working on a CNC machine has never been so easy an convenient.

All of the essential functions are directly in view and mounted directly on the machine. Thanks to the large window everything is always in view. Access to the table is free, no disturbing fences are required to the left and right. Fully implemented bumpers combine productivity, security and access to the machine.

  • BMG 310 configuration

    BMG 310 | Configuration

  • 8-space linear changer

    8-space linear changer with tool transfer station, mounted on the side.

  • 10-space tool changer

    10-space tool changer traveling with spindle.

  • 32-space tool changer

    32-space tool changer – arrangement of the tools in an inner and an outer ring.

  • 14-space tool changer

    14-space tool changer for tools and units with a diameter of up to 200 mm and saw blade up to 350 mm in diameter.

  • Easy access

    Drill changes, service, refilling adhesive and edge changes can be carried out easily from the front side of the machine.

  • Second operating terminal

    Second operating terminal (option) for optimum shuttle operation without unnecessary walking

  • LED system arguably

    LED system arguably the fastest and safest positioning system for consoles and clamping elements (patented).

Benefits

  • Smart support for support and maintenance using the service pad and display of machine status on smart devices.
  • saveScan scanner for contact-free protection of the positioning of the automatic table and feed reduction in conjunction with the Speed Pack (option).
  • Convenience package (option): Operating functions can be activated with a button directly on the machine. An integrated proximity scanner for intelligent pausing is included.
  • Simple disposal of the offcuts and chips using the integrated chip belt. A waste box can be easily pushed onto the belt from the front (option).
  • Deposit position to the left and right on the machine for clamping equipment.

  • Switch bar instead of foot switch

    No searching and moving the foot switch – stops, output stroke rails and vacuum clamping can be activated easily.

  • Button for program start

    directly on the left and right stop profile of the machine table. The clamping status is immediately in view thanks to the multi-colored light display.

  • Easy access

    Drill changes, service, refilling adhesive and edge changes can be carried out easily from the front side of the

    machine.

  • Second operating terminal (option)

    For optimum shuttle operation without unnecessary walking – ideal for machines with a large work field. Program selection and assignment of the machine is possible on both sides.

33 42 60
Workpiece length X – Individual processing[mm]
(tool length 140 mm / with all aggregates)
3.300 4.200 6.000
Workpiece length X – Alternating processing* [mm]
(tool length 140 mm / with all aggregates)
1.000 1.450 2.350
Workpiece width Y [mm]
(with tool diameter 25 mm, 
rear stop)
1.600
Workpiece width Y [mm]
(with tool length 230 mm / with all aggregates,
rear stop)
1.350
Workpiece width Y [mm]
(Edge gluing and post-processing, 
rear stop)
1.600
Workpiece width Y [mm]
(mit allen Aggregaten,
stop forwards)
1.350
Workpiece width Y [mm]
(Edge gluing and post-processing, 
stop forwards)
1.350
Workpiece thickness Z [mm]
(vacuum cup height 100 mm)
200

* Dimension with central division.
** Depends on machine configuration.
Technical data and photographs are not binding in every detail. We reserve the right to make changes during further development.

Back to List

Any questions?
We are at your service!

Contact form
ProductFinder